EC3/8 Design Library

The Beam type exposes the following members.

Fields

  NameDescription
Camper
The Camper that is given to the beam's middle point
DuctilityDesignParameters
DuctilityDesignResults
EndingNode (Inherited from FrameElement.)
EndingReleaseRX (Inherited from FrameElement.)
EndingReleaseRY (Inherited from FrameElement.)
EndingReleaseRZ (Inherited from FrameElement.)
EndingReleaseTX (Inherited from FrameElement.)
EndingReleaseTY (Inherited from FrameElement.)
EndingReleaseTZ (Inherited from FrameElement.)
ExtraResultsRunway
Additional check results of runway beams
FrameResultsSets_DEAD_SLS
Dead load combinations included in each SLS combination
(Inherited from FrameElement.)
FrameResultsSets_LIVE_SLS
Live load combinations included in each SLS combination
(Inherited from FrameElement.)
FrameResultsSets_SLS
SLS combinations
(Inherited from FrameElement.)
FrameResultsSets_ULS
ULS combinations
(Inherited from FrameElement.)
ID
ID of Frame Element
(Inherited from FrameElement.)
IsRunwayBeam
Specifies whether this beam should be designed as runway beam
Length
Length of Frame Element
(Inherited from FrameElement.)
Material
Material of Frame Element
(Inherited from FrameElement.)
PointInPlaneXY (Inherited from FrameElement.)
RunwayData
Runway data, in case of runway beam
Section
Section of Frame Element
(Inherited from FrameElement.)
SeismicOnlyLoads
Combinations with seismic-only loads included in seismic combination
(Inherited from FrameElement.)
SeismicVericalLoads
Combination with vertical loads included in seismic combination
(Inherited from FrameElement.)
SLSResultsBeam
StartingNode (Inherited from FrameElement.)
StartingReleaseRX (Inherited from FrameElement.)
StartingReleaseRY (Inherited from FrameElement.)
StartingReleaseRZ (Inherited from FrameElement.)
StartingReleaseTX (Inherited from FrameElement.)
StartingReleaseTY (Inherited from FrameElement.)
StartingReleaseTZ (Inherited from FrameElement.)
Story (Inherited from FrameElement.)
Type (Inherited from FrameElement.)
TypeForDeflectionCheck
The Beam type, it can be NonAccessibleRoofs or AccesibleRoofsOrFloors
za
Z coordinate of load application point on section (input)
(Inherited from FrameElement.)

See Also